|
| |
Buyer Beware
MXLO Magnetic Motor DC Generator Plans
MagnetHealer.com
claims to have working electricity generating unit of approximately one cubic
foot in size (scalable), producing in the range of 50 - 280 V DC. Claims
that assembly is easy. Of 14 known independent attempts as of March 31,
2004, none have been able to successfully attain a working unit.
Page Contents:
Report Successful
Replications • Official
Website • Pure
Energy Systems' feature (Magnetic
Flux Photos) • Brief
Description • Replications
Group • Feedback • See
also • Contact
No verified, successful replications achieved of at least 14 (8 verified)
independent known replications attempted between Mar. 3 and Mar. 31.
If you are able to successfully replicate this device, please let us
know. We would be glad to feature your device as evidence of the validity
of the design. -- sterlingda@greaterthings.com
Discussion list for replications project.
http://groups.yahoo.com/group/pes_mxlo/join
or send to pes_mxlo-join@yahoogroups.com
Pure Energy Systems
commenced an open sourcing site on March 3, 2004 with the intent of going
public once several working devices had been built to verify the adequacy of the
plans. Unfortunately, the conclusion they arrived at when going public on
April 1, 2004 is that the plans are neither easy to follow (too many
contradictions and uncertainties) nor adequate to build a working device.
Several Replications
under way:
 |
 |
|
Dann McCreary's 1/2-scale |
"tip_alias" Build |
- MagnetHealer.com
- site registered Feb. 4, 2004
- Welcome
- "By arranging rare earth magnets in a special
geometrical spiraling pattern, on dielectric materials, you will
create electrical energy from rotation of the magnets, and the ions in
the air. Power most any electrical device. Power your entire
home for just the cost of materials to build the device."
- Learn
More - device has been known since 1930's by US Navy but
suppressed. Device is self-rotating when brake is released.
See brief description
below.
- FAQ -
not "perpetual motion"; do not sell assembled units; no patent
(tried, but denied); can run continuously; danger, high voltage; 30-day
money-back guarantee; tech support provided in assembly, but not for
power applications.
- Parts/Plans
- According to replication attempts undertaken thus far, plans are not
adequate for resulting function.
 |
 |
 |
 |
|
rotor flux |
rotor flux, far |
stator flux |
stator flux, top |
|
|
|
|
 |
|
|
|
|
rotor turning slow
(notice spiral shape) |
|
|
|
Quoting from
http://www.magnethealer.com/learn.html
This simple device consist of three
dielectric plexiglass strips, which rare earth magnets are affixed
to and placed around in a spiraling path, which create the stator of the
device.
The rotor magnets are connected in
a special configuration on a separate piece of dielectric plexiglass,
which is affixed to a shaft, and connected in the center by a free wheel
bearing.
A strip of aluminum is soldered to the
bottom of the rotor shaft and connected to ground.
A sheet of copper cut in the same geometric
shape as the stator is glued in place under the stator of the device, and a
diode is soldered to the copper for direction of current. A cardboard isolator
is placed between the section of copper that overlaps aluminum connected to
rotor shaft.
Because of the high speed this device can
develop a plastic hand screw, with rubber boot is used for braking and
controlling speed.
Unit can be assembled and running in less then
45 minutes.
* * * *
Parts
Quoting from
http://www.magnethealer.com/faq.html
We include all the parts and
instructions needed to build the unit. You will only need a square
foot piece of sturdy non conductive material to attach unit, such as a piece
of plyboard.
Kit Includes:
- Instructions for assembly, 4 Plexiglass
strips, superglue, plastic assembly screws, plastic hand screw and
rubber boot for braking, cardboard isolator, 85 Neodymium
Rare Earth magnets, copper sheet, aluminum strip, diode, shaft and
bearing.
- Magnet
Motor Assembly Instructions -
 posted
with permission of MXLO at PES, with additional assembly information
and tips, as well as progress of replications. (PES_MXLO
list members get password access. Private until plan adequacy is
demonstrated with several replications.) |
- Magnet Motors - various
other designs & claims.
- Mikell
Device - several people have commented that the MXLO is similar to
the Mikell device; and the MXLO meta tags list Mikel.
MXLO says their first priority is to response to emails from their
customers.
MXLO INNOVATIONS ®
Magnet Healer
652 Atlantic City Blvd Suite 1
Bayville , New Jersey 08721
Email: info@magnethealer.com
Contact: Greater
Things
Page posted by Sterling
D. Allan, Feb. 28, 2004
Last updated November 17, 2006
| |
|
